Manufacture 55cfm Electric Air Compressior Motor Screw Reciprocating Screw Pump

Product Description

Model: DC-30A
Free air delivery: 3.6m3/min
Working pressure: 8bar
Screw air end rotor lobe: 5:6
Brand of screw air end: Hanbell Taiwan AB+ series with 6 pcs bearings
Control: Mircro PLC controller
Driven: direct coupling
Cooling: by air
Electric motor: 30hp 22kW 380V/3PH/50HZ,IP54 protection level
Discharge temperature: less than ambient +8 ºC
Noise: less than 68 dB(A)
Air outlet size: G1"
Dimension: 1330*830*1265mm
Weight: 400kg
Warranty: 24 months for the screw air end,12 months for the whole set compressor except air filter,oil filter and oil/air separator.
Delivery time: 25 days after receiving deposit.







 

Advantages

Air end
1.SAP type line to maximize the screw compression efficiency Similar products save more than 5%
2.High machining accuracy, low vibration of main machine and low noise
3.Reached National Level 1 Energy Efficiency Standard.

Motor
1.Efficient design, bearings, ensure the long life of the motor.
2.IP54 protected fully enclosed motor, worry-free in harsh conditions run.
3.Standard phase sequence protection to prevent reversal.

Large Touch Master Controller
1.Matching inverter exclusive customization.
2.LCD Chinese and English switch display.
3.Rich self-diagnostic functions such as fault alarm, maintenance reminder, automatic shutdown, etc.
4.Clock function, can set timing switch.
5.Multiple signal outputs: RS485 port.

Inverter
1.ABB / Siemens brand vector control frequency conversion system, frequency conversion response speed is faster.
2.Constant pressure output to remove pressure fluctuation and off-load.
3.Constant temperature output at 9~85°C, Low starting current to protect components,15% energy-saving.

Pre-filter Protection
1.Unique pre-filter cover design to keep the inside of the machine clean and extend the maintenance cycle.
2.Easy to disassemble and clean, and can be reused.

Efficient Cooling System
1.Adopting large-size high-efficiency cooler to cope with harsh working conditions.
2.Adopt independent large fan combined with oil cooling system, lower temperature and more stable.

Electrical System
1.Standardized design, safe and reliable.
2.Professional wiring interface,the wiring is reasonable, simple, clear and easy to maintain.,
3.equipped with a series of high-level components, and their safe use is guaranteed for a long time.

Direct Drive
1.1: 1 direct drive, stable and efficient.
2.Adopts more mature split-type direct drive, which is more reliable and easier to maintain than integrated drive.
3.Imported brand, large size coupling to ensure the long life of the drive system.

Adaptable
For some areas with poor operating conditions such as high temperature and high humidity,large-area plate heat exchangers and high-efficiency air coolers are used.

Exhaust pipe
The exhaust pipe adopts double-layer bellows,and the oil passage adopts special temperature resistance of 125 °C high-pressure hose.

Technical Parameters:

Model	Discharge Pressure	Discharge Air Volume	Motor Power	Dimension(mm)	Discharge Pipc.Dia	Unit Weight
SEF350Z	0.8MPa	10.0m³/min	55KW	1900X1270X1570	1X2"	1560KG
	1.0MPa	9.0m³/min
	1.3MPa	7.8m³/min
SEF460Z	0.8MPa	13m³/min	75KW	1900X1270X1570	1X2"	1731KG
	1.0MPa	11.8m³/min
	1.3MPa	9.6m³/min
SEF565Z	0.8MPa	16.0m³/min	90KW	2620X1670X1800	1X2"	2260KG
	1.0MPa	14.2m³/min
	1.3MPa	12.2m³/min
SEF710Z	0.8MPa	20.5m³/min	110KW	2620X1670X1800	1X2"	2770KG
	1.0MPa	17.8m³/min
	1.3MPa	15.5m³/min
SEF780Z	0.8MPa	23.5m³/min	132KW	2620x1670x1800	1x2"	2926KG
	1.0MPa	20.5m³/min
	1.3MPa	17.0m³/min
SEF1060Z	0.8MPa	30.0m³/min	160KW	3070X2140X2130	DN80	4100KG
	1.0MPa	26.0m³/min
	1.3MPa	22.0m³/min
SEF1165Z	0.8MPa	32.0m³/min	185KW	3070X2140X2130	DN80	4400KG
	1.0MPa	28.5m³/min
	1.3MPa	25.0m³/min
SEF1270Z	0.8MPa	35.0m³/min	200KW	3420X2220X2130	DN100	5200KG
	1.0MPa	31.0m³/min
	1.3MPa	27.0m³/min
SEF1420Z	0.8MPa	41.0m³/min	250KW	3420x2220X2130	DN100	5300KG
	1.0MPa	39.0m³/min
	1.3MPa	35.0m³/min
SEF1765Z	0.8MPa	50m³/min	280KW	4200X2380X2550	DN125	5600KG
	1.0MPa	42m³/min
SEF1980Z	0.8MPa	56m³/min	315KW	4200X2380X2550	DN125	7980KG
	1.0MPa	50m³/min
	1.3MPa	43m³/min
SEF2190ZW	0.8MPa	63m³/min	355KW	3690X2350X2150	DN125	7350KG
	1.0MPa	55m³/min
	1.3MPa	47m³/min
SEF2580ZW	0.8MPa	73m³/min	400KW	4070X2300X2250	DN150	8100KG
	1.0MPa	63m³/min
	1.3MPa	53m³/min
SEF2860ZW	0.8MPa	81m³/min	450KW	4070X2300X2250	DN150	8500KG
	1.0MPa	71m³/min
	1.3MPa	60m³/min
SEF3145ZW	0.8MPa	89m³/min	500KW	4300X2350X2150	DN150	9000KG
	1.0MPa	79m³/min
	1.3MPa	67m³/min
SEF3530ZW	0.8MPa	100m³/min	560KW	5000X2350X2150	DN200	10000KG
SEF3885ZW	0.8MPa	110m³/min	630KW	5000X2350X2150	DN200	11000KG

PRODUCT HIGHLIGHTS

1.The brand power,reliable quality, stable performance.
   The harsh thermal equilibrium serviceability can guarantee that the machine work effectively under high temperature environment  (≤40ºC);

2.Unique patent design, light load startup system;

3.Efficient cooling system, divided into three parts: water- cooled ,mid- cold, oil cold, which ensure the reliable operation of diesel engine, and it's suitable for high temperature working environment;

4.Independent research and development of the opposite door design, rational layout, which is easy to do regular maintenace ,with advantages of the fixed and portable compressor;

5.A single point lifting, forklift hole device, equipped with drag ring.It is suitable for repair car transport, easy to transfer and installation of the unit;

6.Waterproof and dustproof design, which is suitable for outdoor hard working environment;

7.According to customer requirements, the heating boiler and remote components is available for cold starting;


Product Applications:



Packaging and Shipping

Our workers pack the tested air compressors in wooden cases. After the packaging is completed, the air compressor will be transported to the port and then shipping to the world.




Our Exhibition




Our service

1.Pre-sale service:

Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments . 
1.Select equipment model.
2.Design and manufacture products according to client's special requirement ; 
3.Train technical personnel for clients .

2.Services during the sale:

1.Pre-check and accept products ahead of delivery .
2. Help clients to draft solving plans .

3.After-sale services:

Provide considerate services to minimize clients' worries.
1.Complete After-sales service,professional engineers available to service machinery at home or oversea.
2. 24 hours technical support by e-mail.
3.Other essential technological service.

Contact details: