Model: DC-30A
Free air delivery: 3.6m3/min
Working pressure: 8bar
Screw air end rotor lobe: 5:6
Brand of screw air end: Hanbell Taiwan AB+ series with 6 pcs bearings
Control: Mircro PLC controller
Driven: direct coupling
Cooling: by air
Electric motor: 30hp 22kW 380V/3PH/50HZ,IP54 protection level
Discharge temperature: less than ambient +8 ºC
Noise: less than 68 dB(A)
Air outlet size: G1"
Dimension: 1330*830*1265mm
Weight: 400kg
Warranty: 24 months for the screw air end,12 months for the whole set compressor except air filter,oil filter and oil/air separator.
Delivery time: 25 days after receiving deposit.
Advantages
Air end
1.SAP type line to maximize the screw compression efficiency Similar products save more than 5%
2.High machining accuracy, low vibration of main machine and low noise
3.Reached National Level 1 Energy Efficiency Standard.
Motor
1.Efficient design, bearings, ensure the long life of the motor.
2.IP54 protected fully enclosed motor, worry-free in harsh conditions run.
3.Standard phase sequence protection to prevent reversal.
Large Touch Master Controller
1.Matching inverter exclusive customization.
2.LCD Chinese and English switch display.
3.Rich self-diagnostic functions such as fault alarm, maintenance reminder, automatic shutdown, etc.
4.Clock function, can set timing switch.
5.Multiple signal outputs: RS485 port.
Inverter
1.ABB / Siemens brand vector control frequency conversion system, frequency conversion response speed is faster.
2.Constant pressure output to remove pressure fluctuation and off-load.
3.Constant temperature output at 9~85°C, Low starting current to protect components,15% energy-saving.
Pre-filter Protection
1.Unique pre-filter cover design to keep the inside of the machine clean and extend the maintenance cycle.
2.Easy to disassemble and clean, and can be reused.
Efficient Cooling System
1.Adopting large-size high-efficiency cooler to cope with harsh working conditions.
2.Adopt independent large fan combined with oil cooling system, lower temperature and more stable.
Electrical System
1.Standardized design, safe and reliable.
2.Professional wiring interface,the wiring is reasonable, simple, clear and easy to maintain.,
3. are equipped with a series of high-level components, and their safe use is guaranteed for a long time.
Direct Drive
1.1: 1 direct drive, stable and efficient.
2.Adopts more mature split-type direct drive, which is more reliable and easier to maintain than integrated drive.
3.Imported brand, large size coupling to ensure the long life of the drive system.
Adaptable
For some areas with poor operating conditions such as high temperature and high humidity,large-area plate heat exchangers and high-efficiency air coolers are used.
Exhaust pipe
The exhaust pipe adopts double-layer bellows,and the oil passage adopts special temperature resistance of 125 °C high-pressure hose.
Technical Parameters:
| Model |
Discharge Pressure |
Discharge Air Volume |
Motor Power |
Dimension(mm) |
Discharge Pipc.Dia |
Unit Weight |
| SEF350Z |
0.8MPa |
10.0m³/min |
55KW |
1900X1270X1570 |
1X2" |
1560KG |
| 1.0MPa |
9.0m³/min |
| 1.3MPa |
7.8m³/min |
| SEF460Z |
0.8MPa |
13m³/min |
75KW |
1900X1270X1570 |
1X2" |
1731KG |
| 1.0MPa |
11.8m³/min |
| 1.3MPa |
9.6m³/min |
| SEF565Z |
0.8MPa |
16.0m³/min |
90KW |
2620X1670X1800 |
1X2" |
2260KG |
| 1.0MPa |
14.2m³/min |
| 1.3MPa |
12.2m³/min |
| SEF710Z |
0.8MPa |
20.5m³/min |
110KW |
2620X1670X1800 |
1X2" |
2770KG |
| 1.0MPa |
17.8m³/min |
| 1.3MPa |
15.5m³/min |
| SEF780Z |
0.8MPa |
23.5m³/min |
132KW |
2620x1670x1800 |
1x2" |
2926KG |
| 1.0MPa |
20.5m³/min |
| 1.3MPa |
17.0m³/min |
| SEF1060Z |
0.8MPa |
30.0m³/min |
160KW |
3070X2140X2130 |
DN80 |
4100KG |
| 1.0MPa |
26.0m³/min |
| 1.3MPa |
22.0m³/min |
| SEF1165Z |
0.8MPa |
32.0m³/min |
185KW |
3070X2140X2130 |
DN80 |
4400KG |
| 1.0MPa |
28.5m³/min |
| 1.3MPa |
25.0m³/min |
| SEF1270Z |
0.8MPa |
35.0m³/min |
200KW |
3420X2220X2130 |
DN100 |
5200KG |
| 1.0MPa |
31.0m³/min |
| 1.3MPa |
27.0m³/min |
| SEF1420Z |
0.8MPa |
41.0m³/min |
250KW |
3420x2220X2130 |
DN100 |
5300KG |
| 1.0MPa |
39.0m³/min |
| 1.3MPa |
35.0m³/min |
| SEF1765Z |
0.8MPa |
50m³/min |
280KW |
4200X2380X2550 |
DN125 |
5600KG |
| 1.0MPa |
42m³/min |
| SEF1980Z |
0.8MPa |
56m³/min |
315KW |
4200X2380X2550 |
DN125 |
7980KG |
| 1.0MPa |
50m³/min |
| 1.3MPa |
43m³/min |
| SEF2190ZW |
0.8MPa |
63m³/min |
355KW |
3690X2350X2150 |
DN125 |
7350KG |
| 1.0MPa |
55m³/min |
| 1.3MPa |
47m³/min |
| SEF2580ZW |
0.8MPa |
73m³/min |
400KW |
4070X2300X2250 |
DN150 |
8100KG |
| 1.0MPa |
63m³/min |
| 1.3MPa |
53m³/min |
| SEF2860ZW |
0.8MPa |
81m³/min |
450KW |
4070X2300X2250 |
DN150 |
8500KG |
| 1.0MPa |
71m³/min |
| 1.3MPa |
60m³/min |
| SEF3145ZW |
0.8MPa |
89m³/min |
500KW |
4300X2350X2150 |
DN150 |
9000KG |
| 1.0MPa |
79m³/min |
| 1.3MPa |
67m³/min |
| SEF3530ZW |
0.8MPa |
100m³/min |
560KW |
5000X2350X2150 |
DN200 |
10000KG |
| SEF3885ZW |
0.8MPa |
110m³/min |
630KW |
5000X2350X2150 |
DN200 |
11000KG |
PRODUCT HIGHLIGHTS
1.The brand power,reliable quality, stable performance.
The harsh thermal equilibrium serviceability can guarantee that the machine work effectively under high temperature environment (≤40ºC);
2.Unique patent design, light load startup system;
3.Efficient cooling system, divided into three parts: water- cooled ,mid- cold, oil cold, which ensure the reliable operation of diesel engine, and it's suitable for high temperature working environment;
4.Independent research and development of the opposite door design, rational layout, which is easy to do regular maintenace ,with advantages of the fixed and portable compressor;
5.A single point lifting, forklift hole device, equipped with drag ring.It is suitable for repair car transport, easy to transfer and installation of the unit;
6.Waterproof and dustproof design, which is suitable for outdoor hard working environment;
7.According to customer requirements, the heating boiler and remote components is available for cold starting;
Product Applications:
Packaging and Shipping
Our workers pack the tested air compressors in wooden cases. After the packaging is completed, the air compressor will be transported to the port and then shipping to the world.
Our Exhibition
Our service
1.Pre-sale service:
Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments .
1.Select equipment model.
2.Design and manufacture products according to client's special requirement ;
3.Train technical personnel for clients .
2.Services during the sale:
1.Pre-check and accept products ahead of delivery .
2. Help clients to draft solving plans .
3.After-sale services:
Provide considerate services to minimize clients' worries.
1.Complete After-sales service,professional engineers available to service machinery at home or oversea.
2. 24 hours technical support by e-mail.
3.Other essential technological service.
Contact details:
Audited Supplier 
){kind=link}